TR1012 - Triangle, Frame, Block Combo 1

Almost a Mega Combo, and certainly a GREAT option for custom quilting

5 related setting triangles are not only formatted to be used as "frames" (rotate and place one in each corner) for embroidery or appliqu?, BUT also have an accompanying block pattern. These can easily be used to layout a whole quilt - including borders! Triangles are provided to fit "tight" in a setting block with a 15" base. The frames are provided at 10" x 10" PER CORNER, and the blocks are provided at 12". This set is very versatile and can be sewn out fairly small because of the open feeling to the patterns, yet give even coverage at much larger sizes. Please see illustration for layout suggestions.

TX1001 - Undulating Backgrounds 1

1st in our new series of background textures for the new advanced features on systems and in software.

Two background textures create a wonderful look for clipping. We've provided two versions of each... One that is continuously sewn and the other with jumps/no sew lines. Patterns are provided approximately 15" square. They could easily be resized to 3 times their size to provide a less dense version for clipping.

TX1002 - Crosshatch Backgrounds 1

A classic series of cross hatching textures for clipping.

All pattern are provided approximately 15" square. The three patterns include: a 1/2" continuously sewn cross hatching background, a 1/2" x 1" continuously sewn diamond background, and a 1/2" x 1.5" continuously sewn diamond background. Due to the geometric nature of these patterns they can resized as small or large as you need them.

TX1003 - Spiral Texture and Motif - 16 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a low density radiating spiral pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 squared off patterns, 2 round patterns with a small center, and 2 round patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. Please note that the 'arms' do not precisely overstitch each other, but taper apart ever so slightly as they near the center to allow for a smooth trasition to the next 'arm'. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1004 - Rosette Texture and Motif - 16 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a low density rosette pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 patterns with a small center, and 2 patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1005 - Spiral Texture and Motif - 24 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a low/medium density radiating spiral pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 squared off patterns, 2 round patterns with a small center, and 2 round patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. Please note that the 'arms' do not precisely overstitch each other, but taper apart ever so slightly as they near the center to allow for a smooth trasition to the next 'arm'. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1006 - Rosette Texture and Motif - 24 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a low/medium density rosette pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 patterns with a small center, and 2 patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1007 - Spiral Texture and Motif - 32 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a medium density radiating spiral pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 squared off patterns, 2 round patterns with a small center, and 2 round patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. Please note that the 'arms' do not precisely overstitch each other, but taper apart ever so slightly as they near the center to allow for a smooth trasition to the next 'arm'. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1008 - Rosette Texture and Motif - 32 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a medium density rosette pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 patterns with a small center, and 2 patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1009 - Spiral Texture and Motif - 48 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a high density radiating spiral pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 squared off patterns, 2 round patterns with a small center, and 2 round patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. Please note that the 'arms' do not precisely overstitch each other, but taper apart ever so slightly as they near the center to allow for a smooth trasition to the next 'arm'. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1010 - Rosette Texture and Motif - 48 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a high density rosette pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 patterns with a small center, and 2 patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1011 - Spiral Texture and Motif - 64 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is an ultra-high density radiating spiral pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 squared off patterns, 2 round patterns with a small center, and 2 round patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. Please note that the 'arms' do not precisely overstitch each other, but taper apart ever so slightly as they near the center to allow for a smooth trasition to the next 'arm'. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1012 - Rosette Texture and Motif - 64 arms

Designed to be clipped or used 'as is'. Two sizes with a variation.

This is a ultra-high density rosette pattern. It is supplied 12" and 24" across - depending on your needs. While designed for clipping, the patterns can also be used as a textured fill for a whole block. The set consists of 2 patterns with a small center, and 2 patterns with a larger center. The larger center is to compensate for the large amount of thread that converges there. The 24" pattern is provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1013 - Radiating Textures

Designed to be clipped or used 'as is'. Two sizes with a variation.

6 designs in both 12" and 24" size feature lines radiating from the center. Please note that as the number of lines increases, there is a slight opening at the center to prevent problems with thread build-up. Please note that the 'arms' do not precisely overstitch each other, but taper apart ever so slightly as they near the center to allow for a smooth trasition to the next 'arm'. The 24" versions are provided so that you do not necessarily have to center your clipping design on the background. Try placing your clipping path with a corner near the center or off to the side for a custom effect.

TX1014 - Undulating Crosshatching 1

A fascinating texture for clipping to place inside or around a shape.

One of the downsides with crosshatching on robotic systems is that it can frequently look uneven. Our undulating crosshatches hide a great deal of that by creating movement and a somewhat uneven, but regular look. The provided textures feature lines 1/4" apart. They are provided at 24" and 12" and can be easily resized for desired density.

TX1015 - Undulating Crosshatching 2

A fascinating texture for clipping to place inside or around a shape.

One of the downsides with crosshatching on robotic systems is that it can frequently look uneven. Our undulating crosshatches hide a great deal of that by creating movement and a somewhat uneven, but regular look. The provided textures feature line pairs that are 1/2" apart (center of one pair to the center of the next pair) - or 1/4" center to center. They are provided at 24" and 12" and can be easily resized for desired density.

TX1016 - Simple Clam Shell Textures 1

A set of background textures for clipping.

This set includes 3 backgrounds - a 1/2 inch wide clam shell at 12 inches square and 24 inches square, and a 1 inch wide clamshell at 12 inches square. Sizes can easily be adjusted to create dfferent densities for background fills.

TX1017 - Stacked Circle Textures 1

A great utility pattern for background fills.

This pattern sews a single row of circles back and forth to create a fill to be used in clipping to fit an area. Overstitching is alternated to reduce visibility. Pattern is proved in 4 variations - 1/2 inch circles at 12" and 24" square, 1 inch circles at 24" square and 1/4" circles at 12" square. Patterns can be easily resized to adjust density.

TX1018 - Tessellating Circles Textures 1

A much in demand background fill for clipping.

This pattern sews a DOUBLE row of circles back and forth to create a fill to be used in clipping to fit an area. Overstitching is minimzed to reduce visibility. Pattern is proved in 4 variations - 1/2 inch circles at 12" and 24" square, and 1 inch circles at 24" and 12" square. Pattern can be easily resized to adjust density.

UT1001 - Utility Circular Frames 1

First in a set of utility patterns designed for embroidered or applique blocks

By Request, here is the first of a series of block patterns for quilters who like to mix embroidery (or other medium) with quilting. This particular set of blocks is designed to create a large open circle of elaborate quilting around a central piece. REDIGITIZED and provided 12" high in all formats plus a special 5" version for the PC Quilter.

UT1002 - Utility Stipple Frame Circles

Second in a set of utility patterns designed for embroidered or applique blocks

By Request, here is the first of a series of block patterns for quilters who like to mix embroidery (or other medium) with quilting. This particular set of blocks is a set of stipples with different size center openings. All the blocks are provided 10" square with openings of 5", 6", 7" and 8". REDIGITIZED and provided in all four formats.

UT1003 - Utility Burst Frames 1 amd 2

Third in a set of utility patterns designed for embroidered or applique blocks

By Request, here is the first of a series of block patterns for quilters who like to mix embroidery (or other medium) with quilting. This particular set of blocks contains two different variations - one with two different size center openings and the other with three. REDIGITIZED and provided 10" high in all formats.

UT1004 - Utility Calligraphic Frames with Border1

Swirls and sweeps decorate this functional set of frames with complimentary border

Designed for use with embroidered blocks or other central motifs that do not benefit from quilting, this set of utility patterns features a frame design for a hexagonal block, an on point block and a regular blcok, in addition to a complimentary border pattern. REDIGITIZED and provided 10" & 15" (border is 8") high in all formats. Easily resizable for smaller throated machines (or larger). Sews out nicely at 5".

UT1005 - Utility Calligraphic Frames and Motifs 2

Our second set of frames based on calligraphy feature matching motifs.

Designed for use with embroidered blocks or other central motifs that do not benefit from quilting, this set includes motifs for "alternate" blocks that may not contain central images. Two sets are included - one set is based on hexagons, and the other octagons. REDIGITIZED and provided 10" & 15" high in all formats plus special 5" versions for the PC Quilter.

UT1006 - Utility Frame and Motifs 3

A frame with two matching motifs

Designed for use with embroidered blocks or other central motifs that do not benefit from quilting, this set includes 2 motifs for "alternate" blocks. One motif is very complex and the other simple. REDIGITIZED and provided 10" & 15" high in all formats.

UT1007 - Utility Frame and Motifs 4

A frame with two matching motifs

Designed for use with embroidered blocks or other central motifs that do not benefit from quilting, this set includes 2 motifs for "alternate" blocks. One motif is very complex and the other simple. REDIGITIZED and provided 10" & 15" high in all formats.

UT1008 - Diamond Basting for 15 Inch Plus Machines

AT LAST!!! A great basting pattern for those with a longer throated machine - 5 variations

5 diamond basting patterns can also be used as cross hatching on borders (watch the draw in!). Patterns are supplied 12" tall and 132" wide. Use the CLIP command and clip from the LEFT SIDE ONLY to have no overstitching. Pattern is supplied at 1", 1.5", 2", 3" and 4" density. No more guesswork and alternate row sewing! Just sew these patterns row after row to quickly and simply baste your quilt!

UT1009 - Diamond Basting for 8-9 Inch Throat Machines

A great basting pattern for those with 9" throat sewing machines. PC Quilter format ONLY.

6 diamond basting patterns can also be used as cross hatching on borders (watch the draw in!) Patterns vary in height, but are all 5" or less. They are provided 132" wide. Use the CLIPL (clip Left Edge) command to shorten the pattern to fit different widths. NOTE THAT THIS PATTERN IS ONLY IN PC QUILTER FORMAT as it is not suitable for long arm robotics.

UT1010 - Diamond Patterns (60-120) - 1

Incredible diamonds for LoneStar quilts or others that use 60 - 120 proportion diamonds

6 elaborate diamond patterns include floral motifs, arabesque, and flourishes. The proportion is perfect for any quilt that uses the 60 degree diamonds. Pattern are provided 10" tall for the maximum versatility and easy resizing.

UT1011 - Diamond Patterns (60-120) - 2 Simple

Simple diamonds for LoneStar quilts or others that use 60 - 120 proportion diamonds

6 simple diamond patterns include stipple, feathers and spirals . The proportion is perfect for any quilt that uses the 60 degree diamonds. Pattern are provided 10" tall for the maximum versatility and easy resizing.

UT1012 - Lacey Swirls 2 - Frames

Easy, fast sewing frames to match EZ1003 Lacey Swirls 3 - Motif and All Over

Frames are provided 10 inches high and in 8 and 12 sided versions with alternates. This allows maximum versatility for the thickness of the frame you require. It coordinates perfectly with EZ1003 for a consistent look throughout your quilt. It also compliments AO1015 and AO1020.

UT1013 - Double Wedding Ring 1

Our first, COMPLETE solution for Double Wedding Ring Quilts

Everything you need to quilt your next Double Wedding Ring Quilt successfully is in this set! There is a large 'pointy' square, two peel patterns - one horizontal and one vertical, AND a 'quarter square' for those quilters who have machines with limited throat depth.